Having problem with sequencer.

I loaded a drum program into my 4000 but cant open it up in the sequencer page. I go to where it says "Part: 1-Program 1" but it will not change. I have also loaded several other programs to see if it was just the programI have never had this problem before. Has anyone encountered this before?

yeah this has happened once or twice to me, try going to sample list and pressing some pads then go back to the main window, otherwise save you sht and re-boot pc style!!!!!
Enjoy.Pez

you must create/select a multi first (which is done from multi page, window/new ...) there you can place than your programs!

sup,

also you may need to create more parts for the multi,
go to the multi page ,move the cursor to parts(far left colum) ,push the window key and follow on screen instructions.

R

Thanks Altopiano. I made a change in multi-mode and that did it. I cant remember excatly what I did but I followed your instructions. I would look at my 400 to figure out what I did but my MPC is currently disassembled. Im trying to install the IB-4ADT and its a ****. Damn Akai sent me the instruction for the rack mount sampler. The instruction were vague anyways.