NPC4k OS 1.71 update notes. Anyone have that?

My MPC4k is on 1.70 and Im wary of changing it as everything is going fine. No need to rock any boats over here.

I cant see any release notes for the 1.71 OS on Nukais site
Anyone have such a thing, or can you recall what the updates consisted of, bug fixes etc. I dont notice any bugs mind you.

I've never come across a release note sheet for 1.71. I have the one for 1.70, apologies if you already have it or it's no help.

"MPC4000 V1.70 has been released with the following new features and bug fixes from V1.60.

[New features]
General improvements
(1) The speed of automated Multi change (via Bank Select or Program Change) has been greatly improved.
(2) USB reliability greatly improved, especially when transferring large amounts of data from the MPC4000 to akSys.

SAMPLE mode
(1) Restrictions in setting the region and trim positions of samples have been relaxed.
(2) Editing of sample trim, loop and region start and end points is now possible using Qlinks Q5 and Q6. The edit operation is only active whilst Q5/6 ACTIVE key is pressed and held.
When ACTIVE key is first pressed, the 'zero' position of the fader is set. e.g., if fader position is at bottom, then edits will only be possible in positive direction, if fader position is at top, then edits will only be possible in negative direction.

MISC mode
(1) Add to play start option
* PLAY START key: TOP => play from the start of a sequence.
* PLAY START key: LOOP => play from the start of loop.
(2) Add NEXT, SUDDEN in the Sequence change with pgm change field.

MAIN mode
(1) TIMING CORRECT + WINDOW key opens TIMING CORRECT window.
(2) New locate key assignments.
(3) Device list now saved in flash:
1. Select MIDI OUT A-D and press window key on device field.
2. Input each device name. And press STORE (F6)
3. Device list save in flash.
Hint => If an .ALL file is loaded, it will overwrite the Device List in memory, but will not overwrite the copy stored in flash.

MIDI mode
(1) MIDI filter now saved to flash:
1. MIDI filter page (F2) in the MIDI mode.
2. Press STORE (F5) and open "Store MIDI Filter" window.
3. If press DO IT (F6), MIDI filter now save to flash.
GLOBAL mode
(1) After CLEAR MEMORY is performed, default items are now created if Default Items is set to ON.
(2) Changed CLEAR MEMORY warning window to use F1 and F5 keys:
* V1.60 => YES (F4), NO (F5)
* V1.70 => CHANCEL (F1), DO IT (F5)

SEQ EDIT mode
(1) MOVE PAD function is available in both SEQ and STEP EDIT pages but only for DRUM tracks. On INST tracks it shows MOVE NOTE. This feature (i.e. MOVE NOTE) has also been improved and made consistent in operation. In STEP EDIT the MOVE PAD/NOTE feature is only available if the event display is set to NOTE.

[Bugs fixed]
* Crash when deleting sequences in SONG page in certain circumstances.
* In the SONG page, continually copying & pasting a 999Bar sequence could cause a crash.
* Fixed crash when recording in Step Edit and a "MIDI Panic Reset" is received on MIDI-in-I and MIDI-in-II simultaneously.
* Modified playback to avoid clicks at the end of some samples (was only noticeable when polyphony was exceeded and voices were stolen).
* Fix problem with some USB memory sticks where samples could be corrupted during loading.
* MIDI filter did not function for MIDI-in II (only for MIDI-in I).
* MIDI clock received on both MIDI-in I and MIDI-in II would conflict with each Now the sequencer will only follow one of these.
* INITIAL Settings didn't reset the MIDI filter, it now does.
at the beginning of the sequence.
* MIDI events could not be recorded during play sequence into any places other than the LOOP range.
* "Sequence change with Program change" didn't work on pages other than MAIN.
* If a long sysex message (9 bytes or more) was recorded in step edit mode, incorrect data was recorded.
* Sample Trim Start was not set correctly when the record pre-trigger size was changed.
* On entering EFFECTS pages, "NO EFFECT" could be shown instead of the correct effect. This only happened when coming from PROGRAM or SAMPLE monitor mode.
* In the LOAD page, sometimes the disk contents would not be displayed and would appear to be blank.
* Selecting edit range using SHIFT+Locate keys not Working in the STEP EDIT mode.
* During sequence record, if you press and hold the TC key, the cursor jumps to the TC field as expected, but after 2-3 seconds, it jumps back to its previous position.
* When Loading a sequence in LOAD mode and there is same name sequence in memory. "Item(s) Renamed (207) / CANCEL" was changed to "Item(s) Renamed (207) / OK" since it is not possible to cancel this; it's for information only.
* It was not possible to access any partition other than the first partition on MPC formatted CD-ROMs.
* When the Note Event data of Track1 of sequence 1 is copied to (MERGE) Track2 of sequence 2, display was strange.
* In MAIN mode, (Unused) sequence is not initialized with cursor in Track block.
* Display bug in A.punch field in main mode: cursor could move to the left-side of out time: field.
* Numeric keys did not function correctly in the "Separate by MIDI" window.
* Overdubbing a looped sequence didn't work correctly.
* After executing the MOVE function, the NOW time was reset to 001.01.000 which was inconvenient.
* It was possible to record events beyond the end of the sequence and these resultant events could not be deleted by ERASE ALL.
* When copying/pasting events with REPLACE mode selected, events in the same region that were not of the type pasted would be deleted.
* In 16-levels window, a note is no longer sounded when the pad is changed by the data wheel. This could sometimes cause problems when one-shot samples were played.
* Several pages' softkey labels were changed to make consistent with other pages (e.g., YES/NO, DO IT/CANCEL).

I didnt have the 1.70 notes so thank you V much for that.
Very interesting stuff.

From this MPC-Forums:
viewtopic.php?f=2&t=45383

FIXES:

MPC4000 V1.71 Software Release Notes
MPC4000 V1.71 has been released with the following bug fixes from V1.70.
[Bugs fixed]
1. Crash when deleting sequences in SONG page in certain circumstances.
2. In the SONG page, continually copying & pasting a 999Bar sequence could cause a
crash.
3. Slow behavior of EDIT PROGRAM page during the sequence playback (with using
Internal voices).
4. There was no EJECT button in the MEMORY TO CD function screen.
5. St/End point of the sample made by S5/6000 cannot be correctly loaded.
6. E-MU format sample cannot be correctly loaded.
7. When performing DELETE SECTION of a sample, if the section selected was the
full length of the sample, a zero-length sample could be created (it had no audio
data). In version 1.71, this now displays “This process cannot be completed as the
resultant sample will be too small”.
8. When Auto Load is set to “ON”, startup with only one IDE device (HDD or CD-RW
etc) is very long. The startup time in this situation has been improved.
[Note]
O.S. V1.71 for MPC4000 will be uploaded on AKAI professional web-site.
Addendum operator’s manual for V1.71 will not be issued.
--- end of file---

renegadebliss wrote:8. When Auto Load is set to “ON”, startup with only one IDE device (HDD or CD-RW
etc) is very long. The startup time in this situation has been improved.
[Note]
-

This

Long time no see renegadebliss, been a couple of years...

Still rockin' the MPC4000?