Sustain Looped Samples Without Holding Down The Pad Tutorial

1. Set your sample(s) to 'Loop' in 'Sample Mode' (or 'Play Mode' in the 'Zone' tab of 'Program Mode').
2. Then go to 'Program Mode'.
3. Then select 'KG MIX' tab.
4. Select the 'Note Number' of your sample(s).
5. Then press the 'Window' key.
6. Go to where it says 'Play Trigger'.
7. Change to 'Toggle', press 'Do It', and thats it!

Now when you hit the pad with the looped sample it will play continuously without you holding down the pad, until you hit it again and so on.

Usually this kind of feature is in the sample edit mode on samplers.

Thanks to tomc3084 for the tip http://www.mpc-forums.com/viewtopic.php?f=2&t=146266!

For all those who are interested I hope it helps.

This info is on page 209 of the 'reference manual'.

Sayonara!