Mpc 4000 samples not showing up in machine nor usb nor from

Hello on my 4000 I have my tracks in a wav file but there still not showing up in my machine I used a cd and a usb am I doing something wrong

What format type is your USB drive?

NearTao wrote:What format type is your USB drive?

It's a SanDisk - Cruzer 16GB USB 2.0 Flash Drive

That's not the format though... I think you need a FAT16 or FAT32 format, definitely won't work with exFAT.

NearTao wrote:That's not the format though... I think you need a FAT16 or FAT32 format, definitely won't work with exFAT.

what's the correct usb to buy bro

The one you have is probably fine.

What operating system do you use, Windows, OS X, Linux, something else?

NearTao wrote:The one you have is probably fine.

What operating system do you use, Windows, OS X, Linux, something else?

no bro see I'm not using no programs I just have my mpc plugged to my receiver I don't have no computer or laptop my thing is even when I put the track into a wav file it still doesn't show up in the machine

NearTao wrote:The one you have is probably fine.

What operating system do you use, Windows, OS X, Linux, something else?

even blank cdrw or cdr does not show up

Most modern flash drives are formatted to NTFS as they transfer faster and the architecture is newer.
If you want to use your Flash drive, you need to plug it into a computer and format it to FAT32 first.

For Windows, you can press the Windows Key ---> Type in "partition" and a disk management screen will pop up where your drive will be listed along with other drives on a neatly formatted table. Right click the disk (your USB drive letter) and click format and from there just change NTFS to FAT32.

Alternatively, you can use this tool http://www.ridgecrop.demon.co.uk/index. ... format.htm . Either way, your MPC will not read an NTFS formatted drive