By powmax
Wed Mar 17, 2021 9:34 am
Hello from Germany,
maybe some of you might enlight me on this strange behavior of my MPC 4K:
44.1/48 kHz all good
At 96 kHz the 8 Outputs (Main Output = OK) are dead/or distroted (crackles/blips) only when the SPDIF is installed, no ADAT I/O installed.
As soon as I take out the IB4D Interface - everything is fine.
Apart from that, my IB4D works as it should - no issues.
BTW: I testet with two MPC 4k (white / blue) - same behavior (only swaped the IB4D).
I assume this is a design error (ADAT board related?) or my IB4D Digital Interface might be defective
Thank you in advance - Your help is very much appreciated
Marcus
maybe some of you might enlight me on this strange behavior of my MPC 4K:
44.1/48 kHz all good
At 96 kHz the 8 Outputs (Main Output = OK) are dead/or distroted (crackles/blips) only when the SPDIF is installed, no ADAT I/O installed.
As soon as I take out the IB4D Interface - everything is fine.
Apart from that, my IB4D works as it should - no issues.
BTW: I testet with two MPC 4k (white / blue) - same behavior (only swaped the IB4D).
I assume this is a design error (ADAT board related?) or my IB4D Digital Interface might be defective
Thank you in advance - Your help is very much appreciated
Marcus