By Telefunky
Mon Apr 04, 2022 6:45 pm
Hi there, 1st post, 1st question...
I‘m looking for some support (or just a hint to steer me into the right direction) with a recently acquired 4k, full memory, all extensions.
As mentioned the digital io is deaf, signal is recognized as present/not present, but nothing on the meters nor to hear and nothing transmitted via Adat.
Otherwise the machine plays fine.
Since the digital output of the CD is a different path than Adat I suspect the DIO main board, not the Adat extension.
After flashing the OS, there was a small change as it hadn‘t confirmed signal present before.
Of course I‘ve googled the case as good as it gets, but without results.
I’ve started to study the service manual, but it‘s deep... and possibly someone here knows a similar case.
But it’s not the end of the world if it‘s completely unknown.
There‘s a lot to discover with the analog section of the machine... which I already like a lot
cheers, Tom
I‘m looking for some support (or just a hint to steer me into the right direction) with a recently acquired 4k, full memory, all extensions.
As mentioned the digital io is deaf, signal is recognized as present/not present, but nothing on the meters nor to hear and nothing transmitted via Adat.
Otherwise the machine plays fine.
Since the digital output of the CD is a different path than Adat I suspect the DIO main board, not the Adat extension.
After flashing the OS, there was a small change as it hadn‘t confirmed signal present before.
Of course I‘ve googled the case as good as it gets, but without results.
I’ve started to study the service manual, but it‘s deep... and possibly someone here knows a similar case.
But it’s not the end of the world if it‘s completely unknown.
There‘s a lot to discover with the analog section of the machine... which I already like a lot
cheers, Tom