Tell me if im missing something

Post your views and questions about the Akai MPC2500
 Reply Share on Facebook
User avatar

Tell me if im missing something

By armanii Mon Jul 20, 2009 5:45 pm
OK! I really need your help

I have an mpc2500 connected to a fast track pro which is connected to rp5's. I try to plug my juno-d via midi and plug one audio cable from the mpc into the fast track and one from the juno to the fast track.. No sound out of the juno


My main goal is to record drums with the mpc and use my sounds off my juno over them.

Is there anything I need, if so please specify and use models thanks alot!!
& specify which/what cables go where!


so far:

Mpc2500
Roland Juno-D
Fast Track Pro
krk rp5's
User avatar

Re: Tell me if im missing something

By djchucknorris Mon Jul 20, 2009 8:51 pm
Just had a thought...
What software are you using? Do you have the software set-up to accept 2 inputs (input 1&2) or just input 1?
I've seen this happend before and it was because the software wasn't armed for input 1 as a mono track and input 2 as a mono track.
If you create 1 mono track in the software with a fast track pro you will only hear the input 1 or Left side.
Also check your software for a setting called input monitoring...
Hope this helps some...
 Reply
Return to MPC2500