2500 reset by itself

Hi,yesterday i finnaly found working RAM,it gaves me a 64MB more(its 128 third party laptop RAM with full needed specs)

I was messing around with some samples about hour and my mpc just resetted and boot again.
samples was gone, metronome was off and master effects was all resetted to 0. After manually turn off and on again,everything was back to normal.

I have this one MPC for a week(its secondhand buy), and it didnt do this since i installed the RAM.

Can be this because of RAM? (but MPC with boot with new RAM normally,everything looks ok)
Or i have to update OS?(I have Akai 1.2)
Or its just bad RAM?


thanx for anny suggestions:/

k.

You need a 256mb chip.

If this happens after you hit a pad, then something is wrong with the internal power supply....

what version OS are you running? it will tell you when you first turn on the mpc on the boot up screen

hi,thanx for suggestions,
i removed that 128RAM and installed new OS(1.23) and everything works fine now,
i will try that 256 RAM , hope it will be more stable

doubt it was the ram, and the ram you installed was it the EXM 128?, try putting the ram back in and testing now that you updated the OS

ArKyve-31 wrote:doubt it was the ram, and the ram you installed was it the EXM 128?, try putting the ram back in and testing now that you updated the OS

no,no.

i´ve tried 128 third party RAM, so it gave me a 64 RAM at the end,
worked fine, but i think it resets when i fulfill the RAM

krime wrote:

ArKyve-31 wrote:doubt it was the ram, and the ram you installed was it the EXM 128?, try putting the ram back in and testing now that you updated the OS

no,no.

i´ve tried 128 third party RAM, so it gave me a 64 RAM at the end,
worked fine, but i think it resets when i fulfill the RAM

Because you need a 256mb chip. Third party is fine (as long as the rest of the specs match) it just needs to be 256.

+1 third party chip needs to be 256,

mp3 wrote:

krime wrote:

ArKyve-31 wrote:doubt it was the ram, and the ram you installed was it the EXM 128?, try putting the ram back in and testing now that you updated the OS

no,no.

i´ve tried 128 third party RAM, so it gave me a 64 RAM at the end,
worked fine, but i think it resets when i fulfill the RAM

Because you need a 256mb chip. Third party is fine (as long as the rest of the specs match) it just needs to be 256.

ArKyve-31 wrote:+1 third party chip needs to be 256,

thank you,
i´ve found two kingston 256 in e-shops here in czech republic (both last pieces!!:)
so im goin for that