input problem ... need to replace jack socket?

Hello, I have an MPC 2500 and one of the 1/4" inputs has a problem. While I get a good full sound from the right channel, the left channel is much quieter (i.e. when the right channel's input level is maxed at the sample screen, the left channel level is only coming up about a quarter/third of the way).

Is there an easy fix, or do I need to replace a part? Ive only gone as far as soldering new tact switches on in the past. If I need to replace the jack socket, any information about how easy it is to do, and what kind I need/where to get hold of one?

Thanks in advance,
E

PS - have tried searching the net for this, and tried mpcstuff.com but couldnt find anything.. maybe someone can point it out. thanks

Bump... nobody know how to fix/replace dodgy 1/4" input?

YEA MAN SOUNDS LIKE A ****.. CALL MPCSTUFF.COM AND CHECK YOUTUBE. MIGHT NEED TO SOLDER SOME STUFF. I DONT KNOW IF YOUR ARE TECHNICAL LIKE THAT.

you might wanna take it to electronics shop and have them replace that for you

Thanks, so it's not an MPC specific part? Can be done by a general electric repair shop? Thanks

I mean it won hurt to call up Akai, and see what they say. A lot of times its easier just replacing an entire board. Just swap the whole thing out this way everything is cool. Sometimes when one thing starts to go the other stuff may sometimes folllow.

i have this same problem on the outputs, let me know how this works out.

I also have a problem with a **** up input. It's sutch a bollocks cause I have to work around all the time. In the meantime I've adjusted my workflow to match the situation, so I'm not at all limited.
I do my sampling sessions seperatley from my beatmaking sessions.( sampling into my computer with audacity and then exchanging data either via CD or USB). Wich works, but it's still a pain in th ass not to be able to use my MPC the way it could be used if it hadn't that **** problem

i had the same exact problem and posted here but had no answer. now i just sample in mono.

Hello,

It could be a couple of things. The first thing it could be is your Record Gain pot is dodgy. Try pressing down on it or wiggling it while you have your sample source running to see if it makes a difference in either level.

If that doesn't locate your problem, it might be your actual input jack. If this is the case, you might be able to switch out your left channel input with one of your 8 outs, or find one to switch it out with. This method can be done with a soldering iron, different sized screwdrivers to remove the casing, and patience. Please remember though, you are doing this at your own risk and the smart move (if you are not familiar with electric mechanics) is to take it to a professional.

ALSO, please remember to clean all of your connections on a regular basis. I've heard Q-tips and cans of air go a long way when trying to repair a "broken" machine.

I hope any of this might be useful to you. I wish you luck.

-Produktive