Any Advice? Clearer Description of MIDI Bug - MPC2500/Moog

I am not a 100% certain but I am pretty certain either the Akai or the Moog is responding to MIDI data in some strange way.

As you will hear by the examples provided, when the Moog is used to trigger the Virus; the key performance is being sent to the Moog as well. Although this bug happens during the performance, it is not alter the previously recorded Moog MIDI sequence. Upon playback of the sequence, all acts as if this bug never happened; leaving the composition intact peacefully.

I am completely at loss for what’s going on with the MIDI still. I attached mp3s for your review along with as much information as possible to help get a grip on what is happening.

Thanks,
Shane


MP3 EXAMPLES

Moog MIDI Test 1
The complete arrangement. MPC, Virus and Moog. Here you can here what happens when the Moog is used to trigger Part 3 on the Virus.
http://www.shanefontane.com/MoogMIDITest1.mp3

Moog MIDI Test 2
Just the Moog. This example isolates what is actually happening when the Moog is being played to trigger Part 3 on the Virus.
http://www.shanefontane.com/MoogMIDITest2.mp3

++++++++++++++++++++++++++++++++++++++++++++

PATCHES BEING USED

Moog
Patch 15 Drty Bass (A custom Bass patch)

Virus
Sequence Mode
Part 3
RAM-C 54 Gently 1 @

++++++++++++++++++++++++++++++++++++++++++++

MPC SEQUENCE INFORMATION

Moog MIDI Test 1
>Track One
Type: DRUM
Program: ROLAND 808
MIDI: OFF

>Track Two
Type: MIDI
Program: OFF
MIDI: 1B (Moog)

> Track Three
Type: MIDI
Program: OFF
MIDI: 3A (Virus Part 3)

++++++++++++++++++++++++++++++++++++++++++++

MPC/MIDI CONNECTIONS

Going Into the MPC
Digital Performer > MPC MIDI 1 In (for sync with DAW)
Moog > MPC MIDI 2 In (acting as controller)

Going Out of the MPC
MPC MIDI A Out > Moog In
MPC MIDI B Out > Virus In

++++++++++++++++++++++++++++++++++++++++++++

HARDWARE MIDI CONFIGURATIONS

MPC MIDI System Info
Active track receive channel: ALL
Soft thru as: AS TRACK
Sequence change by program change: OFF
Pad to internal sound: ON

Moog LP System Info
MIDI Channel In: 1
MIDI Channel Out: 1
Local Control: OFF
Program Change Send: ON
Program Change Receive: ON

Virus System Info
In “SEQUENCE MDE”
Global Channel: 01
Soft Thru: OFF
MIDI Device ID: OMNI
Arp Note Send: OFF
MIDI Clock: Sync to External
MIDI Volume: ENABLED
Program Change: ENABLED
Multi Prog. Change: DISABLED
Receive Dump: ENABLED

It's not the MPC.

I recreated the same MIDI bug using Digital Performer and the Moog.

Well, if anyoe has ideas cool - if not - i understand... this is no longer an MPC issue.

Thanks again guys!