CD TEAC HELP

Dude, you are the fookin man!!! Worked perfect....

i feel so smug. fuk akai i hope every one mods there sheet now. payback for there sh!t support

What other drives do you guys think would work with the 2500? I am interested in getting a drive to finish off my expansions, I have everything else! I am veryk curious, you guys are on the job....

The CDM25 works perfectly

I am not trying to pay that Akai premeium!

You already did when you purchased an MPC...no?

why you always being sour about sh!t jahrome? u pissed cos u had to buy the m25?

i cant afford the m-25 it took me a year to get the mpc2500 and i aint paying 150 pounds for a laptop drive with akai stamped on it.

get off akais d!ck

yo cuz you done it, good stuff, ! ner my face on the drive will not fit in, y was gonna sand it down so it dose fit, is there a better way ??

yer you lot are bad,,!!! that pin 47 thing work's i got a little needle and just snap it out 47 and sure anuff the mpc z cd drive as soon as i switced it on,,,,,thankz to all you lot, and remember CAKEO BEATZ ten floors up,,,

u can get a replacement bezel for that model. one that got square edges. i just got a big file and sanded it down

Manilla wrote:
why you always being sour about sh!t jahrome? u pissed cos u had to buy the m25?

i cant afford the m-25 it took me a year to get the mpc2500 and i aint paying 150 pounds for a laptop drive with akai stamped on it.

get off akais d!ck

You spent a year to save up for an Akai drum machine. Now, that you have it, you are on a fuc Akai rant. Maybe you should take your own advice

jahrome wrote:

Manilla wrote:
why you always being sour about sh!t jahrome? u pissed cos u had to buy the m25?

i cant afford the m-25 it took me a year to get the mpc2500 and i aint paying 150 pounds for a laptop drive with akai stamped on it.

get off akais d!ck

You spent a year to save up for an Akai drum machine. Now, that you have it, you are on a fuc Akai rant. Maybe you should take your own advice

you have to use the mpc before u no the OS is shit you f"ckin nonce

Did we just change subjects? I didn't know where were talking about the OS. Stay focused...

C'mon Manilla! Everyone here knows that Jahrome knows more than everyone else here on the boards as far as whats best for your machine when it comes to the MPC2500! Don't let him get uder your skin with his smartassed responses. Thats just Jah!

just take a small screwdriver and push #47 back until it is all the way in and in the back pry it alittle more and your done--you dont have to break or soder anything--that's how i got mine to work--sorry about leaving that out--it shows up as master and that makes it a slave drive otherwise--conflict between that and hd--akai removes this pin altogether and thats why it works--i guess any cd dvd combo could work--but it has to have a 2 meg buffer like this drive or it wont write cd's correctly-it doesnt have underrun so it will leave out alot -hope this helps everyone--enjoy and dont pay overprices for this drive--so not worth it