Post your views and questions about the Akai MPC2500
By Nuno cardoso Sun Jul 28, 2019 8:24 pm
Hi,

I'm here to ask for help, today i turned on my mpc2500, loaded a program and noticed that when i touched a pad another one gets triggered, for exemple, you touch the pad where you have placed your kick, lets say you tap it 3 times, with my mpc you wil problably get two kicks and a snare. It's constantly making sounds from other pads (usually from the same horizontal line). I don't know what to do. Does anyone know what's happening? Is it the pad sensor?
User avatar
By Menco Mon Jul 29, 2019 5:57 pm
Pad sensor related. What I usually do is open up the machine whipe off/ degrease the sensor sheet. Also make sure the connections are fitted properly. Hope that’ll fix it.
By Nuno cardoso Fri Aug 02, 2019 2:57 am
Menco wrote:Pad sensor related. What I usually do is open up the machine whipe off/ degrease the sensor sheet. Also make sure the connections are fitted properly. Hope that’ll fix it.


Thanks i will try that
By saltmcgault Fri Aug 02, 2019 7:33 am
if cleaning and checking the connections aren’t fixing the issue reinstall the OS. My friends 2500 has acted all f’d up before. i reinstalled the OS and it worked fine afterwards.