OS1 Grid Edit Questions

Running OS1.

#1. Lets say I have laid down 5 tracks. On the fifth track I laid down some kick drums. I realize I messed up, and need to edit one of the properties of the hits and the easiest way for me to do this is in grid edit (in this particular situation). However, when I go grid edit, I see my track selected (#5) yet I see NO HITS. I change it from 6pad to 16 pad, and scroll through the bars and see no hits, yet I hear them. I solo them, and scroll through them and I can hear them, again, they are _not_ in the window. I'm on the correct pad bank too...

Any ideas?


#2. In Grid Edit, sometimes the bars are spaced somewhat close. I can scroll through them real quick. However on one of my sequences the bars are spaced _very_far_ apart and it takes forever to scroll. Is there a zoom in grid edit?

Thanks in advance.

#2 Check the time correction of the track, that will change the distance between the notes

zombeast wrote:Running OS1.

#1. Lets say I have laid down 5 tracks. On the fifth track I laid down some kick drums. I realize I messed up, and need to edit one of the properties of the hits and the easiest way for me to do this is in grid edit (in this particular situation). However, when I go grid edit, I see my track selected (#5) yet I see NO HITS. I change it from 6pad to 16 pad, and scroll through the bars and see no hits, yet I hear them. I solo them, and scroll through them and I can hear them, again, they are _not_ in the window. I'm on the correct pad bank too...

you probably accidently recorded your kicks on another track (besides 5). check your other tracks.

@sooty_G, nope, already checked that. Any other ideas?

try reloading the project & see if the problem persists. maybe also try copying the sequence to a new sequence and/or make a new project folder and re-saving entire memory to the new folder - then re-load it & see if that helps.

other than that... don't know. sounds like a (rare) os bug.