Stereo outs issue

Hi, am having a potential issue with the stereo outs on my 1000.

Seems both left and right outs are only playing the left side/pan of the audio.

I tried the pannig on the mixer and the right stereo out channel cancels when panned hard right but plays on left side when panned centre or full left.

Left stereo out is fine i.e. plays audio from left side and cancels when panned full right.

Headphone input plays stereo.

Have searched the forums but yet to find any similar problem or a poss fix.

I know theres a parameter for changing stereo and left and right mono signals for sampling/rec but I couldn't find anything for the stereo outs (apart from the mixer).

Any ideas?

Cheers in adv.

MPC 1000.
JJOS FREE 3.15

swap the cables, and swap the ins of your mixer. That will isolate your problem and confirm if it is only coming out of one side. Then try input through as well and see it is sending as stereo then try stereo sample to loaded into a brand new program to make sure

bliprock wrote:swap the cables, and swap the ins of your mixer. That will isolate your problem and confirm if it is only coming out of one side. Then try input through as well and see it is sending as stereo then try stereo sample to loaded into a brand new program to make sure

Thanks for the response.

Pretty sure the issue is coming from the outputs themselves as I was using headphones to check each mpc output separately and then the actual headphone out - which was playing the sample back in stereo (poss mono/stereo if you know what I mean).

Will try the stereo sample suggestion and see how that goes.

Cheers.