MPC 1000 JJ OS2xl individual outs

Forum to discuss all matters relating to the MPC1000 and MPC2500 operating systems created by 'JJ' (all versions).
 Reply Share on Facebook
User avatar

Re: MPC 1000 JJ OS2xl individual outs

By kneebone77 Sun Jan 12, 2014 6:40 am
mackless wrote:Thanks for the reply. I did just that. I set the out of the track to the output i desire. I get no sound.


Are those (physical), outs connected to a mixer?
User avatar

Re: MPC 1000 JJ OS2xl individual outs

By kneebone77 Mon Jan 13, 2014 2:48 am
mackless wrote:Kneebone, not at the moment. I just bought an mpc 1000 off eBay. I just want to makessure all the outputs work. Thanks for your time.


The output your assigning has to be connected to something for you to hear it. :nod:
User avatar

Re: MPC 1000 JJ OS2xl individual outs

By Lampdog Thu Jan 16, 2014 7:00 am
mackless wrote:I plugged headphones into the outputs to test them out.

They are not headphone outs. :lol:
User avatar

Re: MPC 1000 JJ OS2xl individual outs

By SimonInAustralia Thu Jan 16, 2014 7:10 am
You can still hear the output when you plug headphones directly into the rear panel individual and stereo outputs, through the left side of the headphones only, so he should be able to test it like that.
User avatar

Re: MPC 1000 JJ OS2xl individual outs

By sciguy Fri Jan 17, 2014 10:09 pm
SimonInAustralia wrote:You can still hear the output when you plug headphones directly into the rear panel individual and stereo outputs, through the left side of the headphones only, so he should be able to test it like that.



The individual outs are a lower level than the main stereo out. And even that is significantly lower level than a headphone output. So it might not be audible.
 Reply
Return to MPC1000/2500 JJ OS