By 2ndNature
Sun Sep 23, 2018 7:11 pm
Hi, I've been trying to program pitch automation to an external hardware sampler (akai s1000, ensoniq eps) from my MPC1000 with no luck. I can get the results I want when dealing with all internal samples in the MPC1000, but not with any external samplers.
For an example, I have a snare triggered every 16th note over 1 bar. With each 16th note I want the pitch of the snare to decrease by 5. When I program this in step edit mode the pitch of the sample in the external sampler is not affected, but if I program this and assign it to an internal sample in the 1000 it works fine. Any advice???
For an example, I have a snare triggered every 16th note over 1 bar. With each 16th note I want the pitch of the snare to decrease by 5. When I program this in step edit mode the pitch of the sample in the external sampler is not affected, but if I program this and assign it to an internal sample in the 1000 it works fine. Any advice???