Real time data bug 4.71a

Just reported this on JJ' site:

Real time data affects neighbour pads

1. power on -> load sample and put on pad A02
2. make 2 bar sequence
3. go to [mode] + pad 14 [STEP EDIT]
4. go to 001.01.00
5. press F5 "insert" -> Type: REAL TIME -> F5 "DO IT"
6. select "Q:A01 TUNE : +120"
7. go to 002.01.00
8. press F5 "insert" -> Type: NOTE -> F5 "DO IT"
9. select "PAD :A02"
10. go to MAIN -> press play start -> everything is okay -> press stop
11. select "Now:001.02.00"
12. press play
--> BUG: sound at 002.01.00 is played at TUNE +120

notes:

-happens with other pads, too (for example: real time data of A06 affects sound on A05)
-happens with tune, level, pan, reso and cutoff

-maybe connected to this:

13. select "Q:A01" in STEP EDIT
14. turn jog wheel one tick to the right and then one tick to the left
--> PAD does not always change




Hope this is understandable. Can anyone confirm?

i had the same problem in 4.70...i reported it to JJ and on this forum but noone replied...
i can confirm, but sometimes it's hard to reproduce...