Qlink slider: "Low/High"

agreed

Tchenn wrote:Would it be possible to ahave a larger amplitude for q-link parameters, especially for filter. If you need to filter some sound in real time (with LPF)-50 on the slider is too short to completely filter the sound or you have to preset the filter parameter to 55 or 60, but then you loose the highest frequencies.
The only way is to put slider to +50 in the begining of the beat (to get the highest) and the you can filter completely. But it would be easier with -100 on the lowest q-link filter parameter.

Peace...

all you gotta do is put your fixed filter value at 50, and then +- 50 will open all the way and close all the way. well mostly.

Change:
Range is added to MIDI CC.

yeah yeah yeah!

alien_brain wrote:

Tchenn wrote:Would it be possible to ahave a larger amplitude for q-link parameters, especially for filter. If you need to filter some sound in real time (with LPF)-50 on the slider is too short to completely filter the sound or you have to preset the filter parameter to 55 or 60, but then you loose the highest frequencies.
The only way is to put slider to +50 in the begining of the beat (to get the highest) and the you can filter completely. But it would be easier with -100 on the lowest q-link filter parameter.

Peace...

all you gotta do is put your fixed filter value at 50, and then +- 50 will open all the way and close all the way. well mostly.

Yes, right I know that. But if you start a sequence, you'll loose the highest frequencies till you put the q-link to max on the track you need to filter.

i co-sign that... options of +100 to -100 for filters at least, I could use that.

plus it's not the type of feature likely to cause 'bloat' or make the cpu work harder.

Antonym wrote:

Change:
Range is added to MIDI CC.

yeah yeah yeah!

w00t!