Alyi wrote:Dear all
Anyone sync Samplitude 10 with MPC1000(JJOS1) success?
What's your setting in Samplitude sync?
Which way better? MPC as Master or Slave? Any Tips?
Many Thanks for help!!
I just tested it. I used MIDI Clock as synching method, Samplitude 10 being the Master Host.
- Right Click on the "Sync" button located on the right of the transport window. This brings up the Synchronization settings of the current project
- In the Fiel called "MIDI Clock Output" activate "MC Output active"
- Below that, select your MIDI device, connected to the MPC's Sync In
- Activate VIP BPM, so that the tempo is set by the MPC
That's it. You can check the control lights on the transport window, to see if it syncs up (red = no, green = yes, obviously). I also tested using the MPC as Master via MTC and MIDICLOCK, but is was asynchronous in both cases.
Hope, I could help you,
PEACE.
