By g4s
Fri Nov 07, 2008 11:35 am
------------------------------------------------------
Bug Fixes & Change: OS2 Ver1.22 07-NOV-2008
------------------------------------------------------
1. [LOAD/SAVE]
[USB] screen => go to Other Screen.
The motor of a hard disk does not stop.
It will stop, if it goes to other screens once again.
2. [MAIN]
[NEXT SEQUENCE]
When a sequence changes Q-Link is not reset.
3. [GRID]
[TRACK TYPE=MIDI]
If ZOOM IN ZOOM OUT is performed during a play, a display will break.
4. [GRID=Q-REAL]
TC =1/8
DELETE
Not all REALTIME DATA is deleted
<Change>
[TRIM]
[CHOP]
1.Release Time:10 ==> 0 default time change to 0.
2. [Convert to SLICED SAMPLES.]
Create new program:YES
The ATTACK TIME of this program was changed into 0 from 3.
< Addition>
[SEQ EDIT]
[Edit:DURATION]
Mode:TO NEXT NOTE <== Added mode
Duration becomes the time to next note.
---About a PAD pair note number---
---How to reduce the loop noise of a sample---
G4s
Bug Fixes & Change: OS2 Ver1.22 07-NOV-2008
------------------------------------------------------
1. [LOAD/SAVE]
[USB] screen => go to Other Screen.
The motor of a hard disk does not stop.
It will stop, if it goes to other screens once again.
2. [MAIN]
[NEXT SEQUENCE]
When a sequence changes Q-Link is not reset.
3. [GRID]
[TRACK TYPE=MIDI]
If ZOOM IN ZOOM OUT is performed during a play, a display will break.
4. [GRID=Q-REAL]
TC =1/8
DELETE
Not all REALTIME DATA is deleted
<Change>
[TRIM]
[CHOP]
1.Release Time:10 ==> 0 default time change to 0.
2. [Convert to SLICED SAMPLES.]
Create new program:YES
The ATTACK TIME of this program was changed into 0 from 3.
< Addition>
[SEQ EDIT]
[Edit:DURATION]
Mode:TO NEXT NOTE <== Added mode
Duration becomes the time to next note.
---About a PAD pair note number---
---How to reduce the loop noise of a sample---
G4s







