My Chops Play Into The Next Sequence... JJ OS 4.99

Hey guys I've searched every way possible on the forum to find an answer to my prob. No luck. So here goes.. I chopped up a sample and converted to a patched phrase and created a new program. I have 2 sequences using the same program. The verse and hook. The problem is when going from seq 1 (verse) to seq 2 (hook) the last chop of seq 1 plays all the way thru and into seq 2! Any help is appreciated...

Try to make the first sample(pad) you use on the seq2 to mute the last sample you use on seq1, thats the way usely use

Is the program on the same track in both sequences?

@ patrikH..Never thought about that...@ le rat..Yes the program is on the same track in both seq. But when I copied seq 2 track 1 to track 4 I get the same thing. Seq 1 plays into seq 2. Im going to make a totally different program for the chops that are used in seq 2 and see if that helps.

try this:

MODE + PAD 10 (OTHER)

under the MISC tab: change 'Truncate duration' to "TO SEQUENCE END" OR "TO SEQUENCE LENGTH".


might also want to change the 'Mute/stop of one-shot sample' to IMMEDIATE.

@ Sooty_G..thanks for the help. I redid the program and it fixed the prob. Not sure why. But as for your advice the mute/stop of one-shot sample was set to immediate. The truncate duration was set to Seq length. Will check this if it happens again. Is it possible that using the same program on seperate seqs was the cause? Doesn't seem right...Thanks anyway guys!!