By distortedtekno
Tue Oct 11, 2011 7:16 am
--------------------------------------------------------------------------------
Bug fixes & Addition:MPC1000 OS2XL Ver3.04 11-OCT-2011
--------------------------------------------------------------------------------
1. [GRID MIDI]
An event is not erased even if the ERASE button is pressed after OVER DUB+PLAY START.
2. [AUDIO TRACK]
Cursor is strange when cursor is moved to the LEVEL field from the LOOP field.
Moreover, adjustment of LEVEL, PAN, and OUT cannot be performed.
3. [SEQ EDIT]
[DURATION]
TO NEXT NOTE
There is no duration in the last note.
The last note extended duration to the last of a sequence.
4. Duration of the last note is not recorded with the right value.
Duration of the last note does not stop record in the position which canceled REC/OVER DUB.
It will be recorded to the position where the STOP button is pressed.
5. [PATTERN]
1. PC is not outputted even if it play back the pattern with which PC event is contained.
2. A mute event is not registered.
3. It may freezes, if it converts when the number of the bars of END of LOOP is odd.
<<Change>>
1. [GRID]
Behavior of the STEP button was changed.
When the type of a track is DRUM, a vertical marker is moved to the next event or back event on a horizontal marker, by a SHIFT+ <BAR> button.
2. The screen of PATTERN BANK was changed.
The pad (note) used for the pattern is displayed.
<<Addition>>
1. It is F4 (AllTrks) button addition to the mode of pad mute.
Usually, although it works only on an active track, if F4 (AllTrks) button is pressed, it will work on all the tracks.
2. It is F2 (PadChng) button addition to the window of "Pad event move to other track".
If F2 (PadChng) button is pressed, the window of "Pad (Note) Number Change" will open.
An event is moved to other pads (note).
3. [PROGRAM]
The value of a parameter will be copied if the [UNDO] + or cursor key is pressed in the window of "LAYER".
If the [UNDO] + cursor key is pressed in the state of the above figure, the value of TUNE will be copied to a layer 2.
Bug fixes & Addition:MPC1000 OS2XL Ver3.04 11-OCT-2011
--------------------------------------------------------------------------------
1. [GRID MIDI]
An event is not erased even if the ERASE button is pressed after OVER DUB+PLAY START.
2. [AUDIO TRACK]
Cursor is strange when cursor is moved to the LEVEL field from the LOOP field.
Moreover, adjustment of LEVEL, PAN, and OUT cannot be performed.
3. [SEQ EDIT]
[DURATION]
TO NEXT NOTE
There is no duration in the last note.
The last note extended duration to the last of a sequence.
4. Duration of the last note is not recorded with the right value.
Duration of the last note does not stop record in the position which canceled REC/OVER DUB.
It will be recorded to the position where the STOP button is pressed.
5. [PATTERN]
1. PC is not outputted even if it play back the pattern with which PC event is contained.
2. A mute event is not registered.
3. It may freezes, if it converts when the number of the bars of END of LOOP is odd.
<<Change>>
1. [GRID]
Behavior of the STEP button was changed.
When the type of a track is DRUM, a vertical marker is moved to the next event or back event on a horizontal marker, by a SHIFT+ <BAR> button.
2. The screen of PATTERN BANK was changed.
The pad (note) used for the pattern is displayed.
<<Addition>>
1. It is F4 (AllTrks) button addition to the mode of pad mute.
Usually, although it works only on an active track, if F4 (AllTrks) button is pressed, it will work on all the tracks.
2. It is F2 (PadChng) button addition to the window of "Pad event move to other track".
If F2 (PadChng) button is pressed, the window of "Pad (Note) Number Change" will open.
An event is moved to other pads (note).
3. [PROGRAM]
The value of a parameter will be copied if the [UNDO] + or cursor key is pressed in the window of "LAYER".
If the [UNDO] + cursor key is pressed in the state of the above figure, the value of TUNE will be copied to a layer 2.
