Pb velocity with external pads

Hi,

I will try to speak english the best I can.
I use an MPC 1000 blakc (JJOS2XL) for 2 years. I use pads from an electronic drum and a Roland TMC6 (midi converter).
When I hit the external pad, I can assign the sound I want, but there is no velocity. Just full level.
Do you know the problem and is there a solution ? I dont find any solution in the settings of MPC after 2 hours searching..

Thanks a lot !

L

hi, i use TMC-6 too amazing product sadly discontinued so hold on to it!

I also run 3 pd-8 roland trigger pads wit the MPC but ive never needed to adjust velocity!

There is the manual have look see http://www7a.biglobe.ne.jp/~mpc1000/os2xl/manual_3e.htm

http://www7a.biglobe.ne.jp/~mpc1000/os2xl/gpe_amp.htm

VELO (The curve of volume against velocity is determined.)

When this value is low, by a velocity, volume is wide range changes.
When this value is high, by a velocity, volume is narrow range changes.
When this value is 100, it always becomes the same as a velocity 127.

https://www.manualslib.com/manual/31500 ... mc-6.html#
Also the Manual for tmc6 .. Could be a number of things if you have messed with tmc6 settings for each pad.. Threshold, sensitivity, velocity curve.. Worth reading the tmc6 manual first...