Forum to discuss all matters relating to the MPC1000 and MPC2500 operating systems created by 'JJ' (all versions).
By yann Sat Jun 19, 2021 2:15 pm
Hi i've tried to setup my mpc as sound module
1st: i'm on JJS OS v3.16
So I loaded a Sample to a pad got my keyboard hooked to the midi in...
The midi settings are receiving midi
But i cannot play the sample chromatically? only when i use the pads and tha 16 level tune function

I can't seem to figure out why its not working with the keyboard
Midi is receiving on channel 1
Soft thru is not needed but its set on Omni-AB
No program change....
Pad to internal sound is on
Sync in = 1
Sync out = AB

pgm = set to the program with the sound on the First pad...
Type = midi
midi is channel 1

Hope someone can help me out thnx in advance... I've read some posts here in the XL version it's as easy as setting your program type to INST can't find it in my JJOs version 3.16
User avatar
By NearTao Thu Jun 24, 2021 12:43 pm
Assuming you are on JJOS v1... JJOS v2/v3 has key groups, which will do what you want. Drum kits work the way you are describing.

Otherwise you'll need to copy the same sample to all the pads, and then set pitch appropriately in the drum kit. It's a bit of work, but totally doable.