Forum to discuss all matters relating to the MPC1000 and MPC2500 operating systems created by 'JJ' (all versions).
By Fantail Thu Dec 16, 2021 7:19 pm
Hi there, I'm trying to assign outs (1-4) from the +pad 4 track mixer mode so that I can mix seperate tracks (drums, bass, synth etc) on an outboard mixer.
I've figured out how to assign pads to outs (1-4) in the +8 pad mixer mode, but I cannot figure out how to assign tracks. In the track mixer mode I have scrolled from the ST setting to the 1-4 output settings, but no sound comes out after I do this. Am I missing something?

Thanks!
User avatar
By Freeman Fri Dec 17, 2021 11:06 pm
Not sure if this will help but this post may have the answer your looking for?

https://www.mpc-forums.com/viewtopic.php?f=25&t=165576&p=1567595&hilit=Assignable+outputs#p1567595

Specifically this response from @sciguy

"jjos2xl, I assume?


For a pad to follow the settings of any track, you have to set its output in program mode to TRK.
That way, it will output to wherever the track is set to. (including to internal fx)

Note that the track level and pan work regardless of whether the pad is set to TRK."