extending sequence length and copying everything in it?

hi guys, i got a 2bar sequence with 14 tracks going in it and realise that i should have made it 4bars to do some variation. I know how to change sequence length etc, but once i've done that is there a way copy all tracks in the 1st 2bars straight into the last 2bars so i don't have spend ages programming the whole lot in again to the last 2bars to make a 4bar loop? Can't work out to do this and at moment i'm obviously just stuck with either the original 2bar loop, or 2bars of silence in the last 2bars! I realise i could just make a new 2bar sequence and copy it across and make some changes, but that makes lots of extra work in song mode... would be a LOT easier if i could just extend the 2bar sequence to 4bars and copy the 1st 2bars to bars 3 and 4! Anyone know how to do this, or even if you can? Thanks.

You could just copy your original sequence into a 2nd 2 bar sequence.
i'm not a veteran like some others on here. I do not know of a way to do what you asking.

yes its possible, but kinda long winded, read manual about track editing

not too familiar with the 500.
do you have song mode? set your sequence to play twice, then press convert.

or go to seq edit mode, hit events, then copy your two bars to the end of your sequence.

In seq mode you can just go to copy bar and copy the first bar 1 2 to bar to 3 and 4, if that does not make sense read the manual.

Its simple, really.

yep that all makes sense... thanks

Nice one

is something like this possible to do live while the sequence is playing seamlessly?

No, you'll have to stop the sequence to add bars to it. And then you have to stop it again to get into seq edit mode to copy the bars over.

For what you want to do MIDI-wise, an EMU command station would be more suitable and would do everything you want.

Bringing this one back from the dark.