Reviews and questions about the entry-level MPC500
User avatar

By SimonInAustralia Fri Dec 29, 2006 3:57 pm
You need to connect the outputs of the MPC to the inputs of the X-Station25.

It is simple, connect outputs to inputs.

You need normal 1/4 inch (6.5mm) instrument/guitar cables.
User avatar

By mnh2410 Fri Dec 29, 2006 4:04 pm

You could also do resampling.(if you have the 128mb expansion) What this will do is turn your complete beat into an .wav file that you can then either USB over to your PC or save on an CF card and load into your PC.

Nicole



User avatar

By jowdjo Fri Dec 29, 2006 4:08 pm
mnh2410 wrote:
You could also do resampling.(if you have the 128mb expansion) What this will do is turn your complete beat into an .wav file that you can then either USB over to your PC or save on an CF card and load into your PC.

Nicole





Can I save my sequences for .wav to my 128 card? HOW do I do THAT? and what cable I need for my x-station 25? I got 1 input left... the other input got the mic plugged...
User avatar

By SimonInAustralia Fri Dec 29, 2006 4:16 pm
If you want to record the MPC outputs as stereo, then you need to unplug the mic, and use two 1/4 inch unbalanced instrument/guitar cables.

If you want to use the mic at the same time as recording the MPC into the X-Station25, then you can only record a mono signal from the MPC, and you would only connect one cable from one of the MPC outputs to the X-Station.
User avatar

By jowdjo Fri Dec 29, 2006 4:18 pm
So, what cable I need :?: :P
User avatar

By SimonInAustralia Fri Dec 29, 2006 4:54 pm
jowdjo wrote:So, what cable I need :?: :P
Like I said twice above already, you need a normal 1/4" instrument/guitar cable (you need 2 of these same cables if you are unplugging the mic so that you can record stereo from the MPC).
User avatar

By jowdjo Fri Dec 29, 2006 4:55 pm
SimonInAustralia wrote:
jowdjo wrote:So, what cable I need :?: :P
Like I said twice above already, you need a normal 1/4" instrument/guitar cable (you need 2 of these same cables if you are unplugging the mic so that you can record stereo from the MPC).

Can you show me a pic of cable? what is the name to I search in google.
User avatar

By SimonInAustralia Fri Dec 29, 2006 5:14 pm
jowdjo wrote:
SimonInAustralia wrote:
jowdjo wrote:So, what cable I need :?: :P
Like I said twice above already, you need a normal 1/4" instrument/guitar cable (you need 2 of these same cables if you are unplugging the mic so that you can record stereo from the MPC).

Can you show me a pic of cable? what is the name to I search in google.
It is a standard cable used for guitars/synths/etc., available at any music store.

Do an ebay search for 'guitar cable' or 'instrument cable' and you will find plenty. Just make sure it doesn't have an XLR connector on one end, it should have the same connector on both ends. If you look at some of these ads, you will see that most of them are similar, with the same connector on both ends, and they are what you want.

You need it to have a 1/4 inch (6.5mm) T/S (Tip/Sleeve) plug on each end. This plug is like a large headphone plug, not the small walkman style headhone plugs, but instead of the 3 sections on the end of the plug (Tip/Ring/Sleeve-TRS) that the headphone plug has, it only has 2 sections (Tip/Sleeve-TS).

They could be called guitar cables, instrument cables, 1/4 inch cables (but make sure they are unbalanced Tip/Sleeve, not balanced Tip/Ring/Sleeve).
User avatar

By jowdjo Fri Dec 29, 2006 5:16 pm
I understood perfectly :D, thank u for details homie... I go search for the cable ..
User avatar

By SimonInAustralia Fri Dec 29, 2006 5:24 pm
When you need to plug the cable into the X-Station25, it uses the same connector as where you have the microphone plugged in at the moment.

Those large round sockets on the X-Station25 Inputs are called combo-connectors, they accept both 1/4 inch plugs from guitar/instrument cables as well as the larger 3 pin XLR/Cannon type plugs that most microphone cables use.

There is a 1/4 inch hole in the middle of the socket for the 1/4 inch guitar/instrument cable, as well as 3 smaller holes and the large 'ring' hole around the outside of the 1/4 inch hole, that allow the XLR/Cannon plug to use the same socket.
User avatar

By jowdjo Fri Dec 29, 2006 5:26 pm
hmm... Im gonna try buy the cable and try to record something from mpc. :D
Ty again ;)
User avatar

By SimonInAustralia Fri Dec 29, 2006 5:40 pm
You can also get RCA-to-1/4 inch adapters, which allow you to use spare RCA (home stereo type) cables, if you have any of those cables lying around...
http://www.audiogear.com/cgi-bin/shoppe ... add=action

Having proper cables would be better, but this might get you going cheaply, if that matters.

These adapters might also be useful for other things in the future, like if you took the MPC to a friends housde and wanted to plug it into their home stereo/hifi system.
User avatar

By jowdjo Fri Dec 29, 2006 5:43 pm
Yeah I know, I use the RCA cable plugged into PhoneOUT on MPC... but it got a red and yellow in's cable and its impossible to save sound for computer..