using the mpc5000 ADAT with ableton live 8

so please someone point me how to set up the mpc5000 adat with live8,i am trying to track all my individual outs from mpc5000 via ADAT cable with the ableton live,i am using the motu traveller sound card at the moment.thank you.

I am not a ableton user nor do i use your interface but if you connect the adat out to the interface you should see the inputs in ableton where ever you select the current inputs. in my set up the MPC 5000's output 1 & 2 show up as 10 and 11 in Logic.

From Page 195 of the manual... http://www.mpc-forums.com/files/MPC5000/mpc5000_reference_manual_v2.00.pdf

Normally, the ADAT output follows the chart below:
ADAT Channel Output

1 STEREO OUT L
2 STEREO OUT R
3 MIX OUT 3
4 MIX OUT 4
5 MIX OUT 5
6 MIX OUT 6
7 MIX OUT 7
8 MIX OUT 8

However, by setting the value of parameter 'ADAT Chan 1+2' to ASSIGN OUT 1&2, this will allow all eight of the
assignable mix outs to be sent through the [ADAT OUT] port.