By rnrmusicgrp
Fri Jun 09, 2017 1:27 pm
Hey Community of MPC-Forums!
I have a problem I'm encountering at my studio with a sync setup between an MPC 5000 and Pro Tools.
In Pro Tools I go to the Setup menu and choose Peripherals.
I click on the Synchronization tab and make sure MTC Reader Port is set to Any.
I press the Online button on Pro Tools transport. Blue button starts flashing.
On MPCI go to the MIDI/Sync menu.
I set the Sync Out for the MIDI output port I'm using. In this case, Output C.
I set Mode to MIDI Time Code.
I set Frame Rate to 30.
I set Send MMC to ON.
When i Press Play on the MPC it triggers play in Pro Tools, but instead of starting at 01|01|000 it appears to change from bars to ticks or something and in Pro Tools will go from saying 01|01|000 to like 34500.
If anyone can help me figure out whats going on wrong, I WOULD BE SO GRATEFUL FOR YOUR HELP!
I will try and include a video of what is happening on my next post.
I have a problem I'm encountering at my studio with a sync setup between an MPC 5000 and Pro Tools.
In Pro Tools I go to the Setup menu and choose Peripherals.
I click on the Synchronization tab and make sure MTC Reader Port is set to Any.
I press the Online button on Pro Tools transport. Blue button starts flashing.
On MPCI go to the MIDI/Sync menu.
I set the Sync Out for the MIDI output port I'm using. In this case, Output C.
I set Mode to MIDI Time Code.
I set Frame Rate to 30.
I set Send MMC to ON.
When i Press Play on the MPC it triggers play in Pro Tools, but instead of starting at 01|01|000 it appears to change from bars to ticks or something and in Pro Tools will go from saying 01|01|000 to like 34500.
If anyone can help me figure out whats going on wrong, I WOULD BE SO GRATEFUL FOR YOUR HELP!
I will try and include a video of what is happening on my next post.