Mapping for mpc studio to work with baterry 3

Hi,

Everyting is in the thread name, in fact i try to make battery 3 working as plugin mode, it work, but the pads from A1 to C4 doesn't work, i have to use pads from C5....
(I also have to hit pads pretty hard to hear the sample, i can set it, but 1 by one pad, for each program, so one life to set it right)

Is there something to do to make it work normally? Maybe some of you already try?


Thank you!

veda95 wrote:Hi,

Everyting is in the thread name, in fact i try to make battery 3 working as plugin mode, it work, but the pads from A1 to C4 doesn't work, i have to use pads from C5....
(I also have to hit pads pretty hard to hear the sample, i can set it, but 1 by one pad, for each program, so one life to set it right)

Is there something to do to make it work normally? Maybe some of you already try?


Thank you!

1. Turn on your MPC's [FULL LEVEL] button should solve the issue that you have to hit the pads hard.

2. MPC pads are laid out in GM format by default. In Battery 4, locate the 'key range icon'; it should be named something similar in Battery 3. When you strike a pad, the key range will show the MIDI notes mapped to that pad. Click the 'key note' icon to activate it then tap an MPC pad twice. This MPC pad will now trigger that Battery Cell. Repeat this for all MPC pads. In Battery, save this as a template.

Thank you, but do you think i will can apply this template to the library kit or do i have to remap all key each time? (sorry for my french's english)

I just try, and i can't find how to save template, so i try "save automation and mapping" and save "KIT"...After mapping the mpc as i need.
But with both,after, when i open a battery kit, the pads mapping change,if i try to load the "automation mapping" i made, nothing happen, and if i load the kit, of course, it load an empty kit but with the good mapping.