By turntable_slave
Sun Feb 26, 2012 11:27 am
Hi everyone. I've had my MD32 a while and it seems I have finally work out one of the faders and 2 of the rotaries. I want to replace them, but I need to know specifically which part the faders and rotaries are so I can order some, ideally I would like a part on Mouser of Farnell or a similar website.
Faders: It seems MPC Stuff know which fader is required as they are selling them here
http://www.mpcstuff.com/mpc-slider-post-switch.html
They don't specify anything about it though (length, resistance etc.) I'm in the UK, so I'd rather just get them directly from an electronics supplier.
Rotaries: They are continuous turn rotaries, I took apart my MPD32 and saw that they are marked with "OB2 5K" on the side. The presumably means they are 5K rotaries, but again, can't find these online.
Is anyone in the know on this kind of stuff? I am aware this will require soldering, I have professional soldering/de-soldering equipment at my work so this shouldn't be a problem.
Thanks for your help!
Faders: It seems MPC Stuff know which fader is required as they are selling them here
http://www.mpcstuff.com/mpc-slider-post-switch.html
They don't specify anything about it though (length, resistance etc.) I'm in the UK, so I'd rather just get them directly from an electronics supplier.
Rotaries: They are continuous turn rotaries, I took apart my MPD32 and saw that they are marked with "OB2 5K" on the side. The presumably means they are 5K rotaries, but again, can't find these online.
Is anyone in the know on this kind of stuff? I am aware this will require soldering, I have professional soldering/de-soldering equipment at my work so this shouldn't be a problem.
Thanks for your help!