JJ OS Bug Reports (ARCHIVE)

not really a bug but another srange key combination :

when overdub is on pressing play start + play+ 16 levels + numeric is the same as keeping right bar arrow on.

os2 V0.83

SEQ 1 playing 12 bars with 4 tracks and one track is assigned to an audio one. Go to SEQ 2 play 4 bars then change back to SEQ 1, and audio track does not play, have to stop first then play to hear audio track. Don't think audio track recording in the current form is that useful untiland if it becomes a punch in recording process.

3.08...
- when i load up beat from the cf, do that for a while, load another beat, and clear the memory, the samples changes but the sequences of the first song are still on.
- when you got alot of samples on the memory, lets say you are samplin some album trough, it crushes REALLY easily. happened twice today. everything freezes and you gotta put the power off.

havent noticed anything else, but those drive me nuts

not a bug. sorry.

I was messing with 4 band EQ. When i moved the high frequencies between 11022 and 11028Hz i got a glitch in the sound.

Can someone confirm before i decide to send a bug report (i could test only with my headphones).

peace

Reported and confirmed but JJ seems to be busy with OS2 1.0 so no fix until its release.

bug corrected, still OS 4.99 though 02/21 update.

OS2 V0.84:

When I set track type to Audio and record the whole sequence of audio in the main screen, there's always a short part of audio missing right at the end of the sequence. This makes it impossible for me to record continuous sounds (throughout the sequence) if I record it in the main screen.

OS1 4.99 I had hard times with a mic and a bass on a preamp linked to the mpc by spdif. Input thru didn't work well, resulting in glitches and no sound coming out the unit sometimes. I'll ask JJ if it's a bug or what.

tried to find, but nothing yet, so:

INST programs do not work with simult sequence as far as i can see in 0.84

.90

BUG: NOTE ON pads w/ LOOPED SAMPLES play strange in main screen.

1 - load project
2 - loop sample
3 - assign sample to a pad
4 - assign pad to NOTE ON
5 - enter main screen, press pad.
6 - BUG: pad plays and continues when finger is lifted.
7 - NOTE: this does not occur in any 'edit mode

JJ OS2 .90

pattern edit mode (MODE + PAD11)

1. scroll forward through the pattern while it's playing to edit the 2nd bar.
2. adjust the shift parameter.
BUG: tune also adjusts when shift is adjusted.

3. when scolling more to the right, the display lost some of it's contents and a CPU Address error occured.

CPU Address error (read)
----------------------------------------
PC(888d09e0) SR(40001160) TEA(3fb30f89)
--------stack dump (sp=889ffe80) -------
fffffdff 3fb30f73 00000008 7f7801d3
888d01c0 887ff36c 00000000 00000000
8880df58 88216b94 886bf2a8 8880cd5c

distortedtekno wrote:JJ OS2 .90

pattern edit mode (MODE + PAD11)

1. scroll forward through the pattern while it's playing to edit the 2nd bar.
2. adjust the shift parameter.
BUG: tune also adjusts when shift is adjusted.

3. when scolling more to the right, the display lost some of it's contents and a CPU Address error occured.

CPU Address error (read)
----------------------------------------
PC(888d09e0) SR(40001160) TEA(3fb30f89)
--------stack dump (sp=889ffe80) -------
fffffdff 3fb30f73 00000008 7f7801d3
888d01c0 887ff36c 00000000 00000000
8880df58 88216b94 886bf2a8 8880cd5c

To further clarify how I came across this bug and CPU address error, I was using the F buttons while adjusting the shift parameters.

Another CPU Address error....

1. Play sequence and press MODE + PAD11
BUG: Parts of display are missing.
2. Press STOP button and cursor buttons

CPU Address error (read)
----------------------------------------
PC(888d07d2) SR(40001060) TEA(000000bd)
--------stack dump (sp=889ffe84) -------
000000c9 000000a1 888e6aec 88216b84
888d00fc 887ff36c 887ff36c 00000000
00000024 88216b94 886bf2a8 8880cd5c

BUG 1. Pad Pattern & Pad Bank
1.enter pad pattern
2.select pad bank b,c or d
3.press pad
4.pad plays from pad bank a
5.BUG: only sounds on pad bank A can be played from pads in pad pattern mode
also :
1.enter pad pattern
2.change parameter Sound:B1:sample2
3. hit pad B1 > parameter changes to Sound:A1:sample 1

BUG: 16 pad grid edit note repeat cursor behaviour

1.enter grid edit
2.go to 16 pad mode.
3.hold note repeat.
4.turn quantize off using f keys.
4.cursor moves to 1/8 (recorded notes are not quantized)
5.BUG:strange cursor behaviour on note repeat/quantize values in 16pad grid edit.

BUG: Grid edit/ pattern edit recorded notes erased.

1.press overdub in grid edit.
2.hit pads.
3.press numeric and open window to enter pattern edit.
4.recorded data deleted.
5.BUG:erases notes if pattern edit is entered after record.
6.NOTE:does not erase notes if the sequencer is stopped first.


BUG: Q link > Track Mixer problem.

1.Enter Track Mixer Mode.
2.Track Level and Pan move to the q link position, even if qlink is not moved by user.

phew..none of these are too serious.


this one wasn't nice though:

pc(888d09e0) SR(40001060) TEA(00000089)

--------stack dump (sp=889ffe80)-------
ab69a2115 00000069 88216b84 888d07f8
888d0282 887ff36c 00000000 00000000
8880df58 88216b94 886bf2a8 8880cd5c

1.enter pad pattern mode + pad 11
2.go to far right of tune parameter with cursor
3.press >cursor again.
4.cursor looks strange.
5.move data wheel
6.mpc crashes.

just reported it.