JJ OS Bug Reports (ARCHIVE)

I have found a bug last month I didn't report

Set BPM to 300 BPM
LOAD a sample and assign it to a program
Start REC or OVERDUB
Keep pressing NOTE REPEAT at 1/32/3
=> MPC frozen

Well I guess it's a CPU limitation.
Plus common sense is to not play at 300 bpm anyway

le rat wrote:I have found a bug last month I didn't report

Set BPM to 300 BPM
LOAD a sample and assign it to a program
Start REC or OVERDUB
Keep pressing NOTE REPEAT at 1/32/3
=> MPC frozen

Well I guess it's a CPU limitation.
Plus common sense is to not play at 300 bpm anyway

I guess I won't be making any speed-core tracks any time soon.

Haha to be honest I wanted to experience double resolution uptempo stuff when it happened

No doubt. I had a feeling you were at 300bpm for the double resolution. I should've used that trick for some circuit-bent tracks.

I found a small bug just after installing os2xl 2.0

In program mode when you keep pressing the right arrow that doesn't lead to the next tab. You have to press the fkey to go to the next tab.

Hi
For XL2.01 (MPC2500) i reportet this too JJ

1. In 16 Level Mode it freezes when you hold the Full Level and using the Data Wheel.
The + - Buttons had also no Function in Full Level holding Mode. Only the Data Wheel.

2. In next Seq Mode: Hit Button B,C or D of the Pad Bank
Then push the Full Level Button, the Pad Bank switched back to A
Its the same in Track Mute Mode


3. In Mixer Mode the Level is controlled by Q2 !? Not Q1

Thanks

In program mode when you keep pressing the right arrow that doesn't lead to the next tab. You have to press the fkey to go to the next tab.

yo i prefer this so much. no more accidentally going from 1 screen to another.

Matter of taste but I think without it it makes the workflow slower. I've reported it the other day but maybe there was requests to remove that shortcut?

crothers wrote:yo i prefer this so much. no more accidentally going from 1 screen to another.

cosign.

there are still many faults,
eg
Main screen
f1, strange thing (we have the sequence at 1 bar, and f1 may be selected for 1 -*) *= more than 1, this is strange.
also in mode + 9, frozen
how we set up correctly?
I have a set all my external hardware devices identical way as it had for os2, however, is frozen.
for your attention, thank you!

Do a clear step by step bug report and send it to JJ.

PEace

sent

now, awaiting response

2.03
http://www.youtube.com/watch?v=WE5eKsEZr5Q
send it to jj
tomorrow 2.04?

if you're lucky