By elmacaco
Sat Oct 16, 2004 12:59 am
In April the 5000 with USB was going for $300 on ebay, I didn't have my scratch straight or I would have pounced.
By binger0
Sat Oct 16, 2004 1:00 am
yeah the 5ks are real cheap lately i saw a few for under 400 loaded. i gotta get some ends though and sell these 2 before i do that. just give em more time to go down in value.
By phanatik
Sat Oct 16, 2004 7:22 am
elm,
question problem:
on the 3K... say I have some samples in it. and I also have it midi'd up with z4. I wanna use 2gether. When I(on the 3k) - on the channel field type, put it on midi it plays the (internal)samples. and drum it plays the the midi - though when doing the midior drum to play the midi it also plays the internal sounds. I would like for this to cease. Is there a way for this to stop and play whats supposed to be played. I wouls like to have all my drums in the 3K and samples from z4 all sequenced inthe 3k.
thnx.
question problem:
on the 3K... say I have some samples in it. and I also have it midi'd up with z4. I wanna use 2gether. When I(on the 3k) - on the channel field type, put it on midi it plays the (internal)samples. and drum it plays the the midi - though when doing the midior drum to play the midi it also plays the internal sounds. I would like for this to cease. Is there a way for this to stop and play whats supposed to be played. I wouls like to have all my drums in the 3K and samples from z4 all sequenced inthe 3k.
thnx.
InstraMentalz/Phanatiks Entertainment
Newburgh, NY 12five50
www.myspace.com/phanatiks
"Not just fans of Hip-Hop, but addicts @ Hip-Hop!"
- Phanatiks
Newburgh, NY 12five50
www.myspace.com/phanatiks
"Not just fans of Hip-Hop, but addicts @ Hip-Hop!"
- Phanatiks
By elmacaco
Sat Oct 16, 2004 5:52 pm
OK this is tricky so I won't send you to the manual.
To use the pads for the 60 just leave the midi channel field blank and leave it on drum.
to use the 60 pads to control the rack you need to set the midi channel, leave it set to drum, and hit the midi button, press number 2, then turn local off. Then you will only hear the rack samples.
Once the sequence is recorded, you need to change the track to midi so that upon playback you will only hear the rack samples, if you leave it on drum, the mpc samples will hit as well.
If you are using a controller, you set the midi channel to the rack and set the type to midi and the controller will play the samples without triggering the internal samples, which is probably the way the majority of their target market would work anyway.
To use the pads for the 60 just leave the midi channel field blank and leave it on drum.
to use the 60 pads to control the rack you need to set the midi channel, leave it set to drum, and hit the midi button, press number 2, then turn local off. Then you will only hear the rack samples.
Once the sequence is recorded, you need to change the track to midi so that upon playback you will only hear the rack samples, if you leave it on drum, the mpc samples will hit as well.
If you are using a controller, you set the midi channel to the rack and set the type to midi and the controller will play the samples without triggering the internal samples, which is probably the way the majority of their target market would work anyway.
By phanatik
Sat Oct 16, 2004 7:51 pm
thnk u
InstraMentalz/Phanatiks Entertainment
Newburgh, NY 12five50
www.myspace.com/phanatiks
"Not just fans of Hip-Hop, but addicts @ Hip-Hop!"
- Phanatiks
Newburgh, NY 12five50
www.myspace.com/phanatiks
"Not just fans of Hip-Hop, but addicts @ Hip-Hop!"
- Phanatiks