Turntable to MPC 60

So I want to hook up this turntable to my mpc 60. Audio Technica AT-LP-120 (its a technics 1200 replica) but it only has usb to computer. Is it still usable to sample in the MPC 60? Thanks

Computer's audio out to MPC using a 1/8" stereo to dual 1/4" cable. But the signal won't be that great. If you have an audio interface you will got a cleaner and louder signal. In that case use two 1/4" TRS cables.

Doesn't it have audio outputs on a permanently attached cable that has RCA connectors on it?

See 4:54...


Use those, with RCA-1/4 adapters, not USB.

Set the preamp switch on the back of the turntable to line.

A USB signal will have to go into a computer, then out of the computer to the MPC, no point, unless you want to modify the samples inside the computer.

If it's possible could this thread be deleted by the moderators or the administrator, thanks.