PADS PROBLEM ON MPC 60 II

HI
I'm not able to play my drum pad anymore on my mpc 60 II .When i need to affect any sample to any drum pad i have no response even if the programm is loaded i can't get sound or any signal.Does someone knows how to fix this problem?
Thanks

Go to Midi, then hit number 2, turn local On, if it is on, switch it to off then on again.

If that doesn't work, go to other and hit initialize parameters.

If that doesn't work, then it is somethig internal, either a loose cable or a different problem.

Be sure to try a different program as well.

Let us know if any of that fixes it.

[quote="elmacaco"]Go to Midi, then hit number 2, turn local On, if it is on, switch it to off then on again.

If that doesn't work, go to other and hit initialize parameters.

If that doesn't work, then it is somethig internal, either a loose cable or a different problem.

Be sure to try a different program as well.

Let us know if any of that fixes it.[/quote]


Thanks a lot
for responding .i've sent the mpc for repair and i had bad news,the technicians said that there was a problem with an element which bring the sensitivity to the pads.Thats elmt is dead and need to be change.
THANKS AGAIN i appreciate

Yeah, the element is the worst case scenario. But thankfully they are stll available, and once you replace it it will last you for a long long time.