please help SYNC problems

Hi everybody,
I'm new to MPC60, having big problems at syncronize the machine to a MidiClock signal coming from LogicPro - MPCos3.10, Logic7.1
In the sync page everything is set in the proper way, the MPC follows but most of the times the timing is very very bad, altough very rarely they are in perfect sync and sound is then amazing.....
Can somebody give me any advice about it ?
Sending the clock from the MPC to Logic didn't show any better results....
HELP !
TANX !

legoflog wrote:Hi everybody,
I'm new to MPC60, having big problems at syncronize the machine to a MidiClock signal coming from LogicPro - MPCos3.10, Logic7.1
TANX !

Logic on a Motorola MAC ? or an INTEL MAC ? Which MAC Model ? Which MAC OS version ?

A real ? or Cracked Logic ? ( gotta ask !!! ) ...

Which MIDI interface port BRAND/MODEL is connected to the MAC ?

Be certain to disable the option in LOGIC to "send MIDI clock with MTC" as the MPC60 will dummy spit to some degree if forced to deal with receiving both at the same time on one incoming MIDI port.

If working the other way around with LOGIC syncing to a MIDI clock generated via the MPC60 and things appear slippy then the problem is most certainly lying with a setup issue on your MAC/LOGIC/MIDIPORT.

Because ... the MPC60 MIDI clock generation/reception is anything but slippy ... IE: It is tight.

Rohan.