jimmie wrote:Fitted into my MPC3000; with Vailixi 3.50, Delock Card Reader (bezel sprayed black) and Acard 7720U (version 3.45) hot-swap works beautifully!!
SEED78 wrote:@ Jimmie - also, don't you need to remove the original 2 meg memory from your MPC3000 now you have the larger memory in the 2 expansion slots?
old post from AWOL Rohan said when you upgrade to 16/32 meg you need to remove the original RAM on the right hand side, something about it over taxing the MPC blah blah blah worth googling it. have heard it mentioned a few times.
SEED78 wrote:is it the amount of RAM thats an issue then?
not the RAM being read from 2 locations?
The AKAI EXM3002/EXM3008 memory board does not need to be installed when your machine is maxed out to 32 megabyte. Leaving the AKAI EXM3002/EXM3008 memory board installed is not necessary as the MPC3000 just "maps it out". The function performed by an AKAI EXM3002/EXM3008 memory board while its in a "mapped out state" will be that of straining the power supply stages. - Rohan
SEED78 wrote:jimmie wrote:Fitted into my MPC3000; with Vailixi 3.50, Delock Card Reader (bezel sprayed black) and Acard 7720U (version 3.45) hot-swap works beautifully!!
whats your jumper settings on your 3.45 Acard? I've tried every setting I can try I swear, and no luck. plug my old a card in and it works straight away...
I got given one by a mate and its not working with my delock (a setup that works just fine with my normal Acard).
Asichop is a reliable seller, he sent some to my mate and they arrived real fast far and sound!
