By dstrnts
Tue Sep 24, 2013 4:25 pm
Hey guys,
I've done a search for this, but can't seem to find any previous posts with this issue.
Basically my MIDI input 1 and MIDI output 1 and 2 are coming loose. The MIDI cables I plug into it slips out a bit, thus the signals cut out to/from my external gear. I've done my trouble shooting using different cables already.
Has anyone else encountered this issue? I'm not the most savvy when to cracking open my MPC, so I just want to make sure whether it's something I can fix myself by tightening up a few loose screws or I have to replace those MIDI pieces. I did do a search on ebay and online mpc stores, and couldn't find any replacement MIDI connectors. Or can I safely assume that any MIDI connector out there is fine.
Thanks
I've done a search for this, but can't seem to find any previous posts with this issue.
Basically my MIDI input 1 and MIDI output 1 and 2 are coming loose. The MIDI cables I plug into it slips out a bit, thus the signals cut out to/from my external gear. I've done my trouble shooting using different cables already.
Has anyone else encountered this issue? I'm not the most savvy when to cracking open my MPC, so I just want to make sure whether it's something I can fix myself by tightening up a few loose screws or I have to replace those MIDI pieces. I did do a search on ebay and online mpc stores, and couldn't find any replacement MIDI connectors. Or can I safely assume that any MIDI connector out there is fine.
Thanks
