PROBLEM OCCUR! 60

As-salaamu aleykum!(Peace with you!)
Please help!I don´t know if it is only my problem or if it has all 60 machines or if it is exactly trouble or not

When i have 60 turn on,when i put my elbow on the place on 60 behind the LCD(where are undercuts for cooling air into mpc) i feel that small portion of electricity go to my body like if you take small battery and put in on your tongue
I measure out with live-conductor tester that in chasis leak about 100V,but when i catch casis,nothing happend except i feel some electricity in my elbow(hand)

Plese could anyone help??

I have model with 3.10 OS,full expanded RAM,no SCSI and 50Hz-220/240 V power requirements
Please 60 users try this and writte back your results please!

As-salaamu aleykum!(Peace with you!)

InslAllah wrote: I measure out with live-conductor tester that in chasis leak about 100V,but when i catch casis,nothing happend except i feel some electricity in my elbow(hand) !

Your MPC60 is not earthed properly or it is exhibiting bad earth leakage.

Does your MPC60's input mains socket have three pins ? Or two ?

Does the problem go away when you disconnect all other devices from your MPC60 ?

Rohan.

mpc3000le wrote:

InslAllah wrote: I measure out with live-conductor tester that in chasis leak about 100V,but when i catch casis,nothing happend except i feel some electricity in my elbow(hand) !

Your MPC60 is not earthed properly or it is exhibiting bad earth leakage.

Does your MPC60's input mains socket have three pins ? Or two ?

Does the problem go away when you disconnect all other devices from your MPC60 ?

Rohan.

As-salaamu aleykum!(Peace with you!)

The first: very big thank you rohan to your interrest for that problem..So..

The second:No, i must not earthed 60 cause in the operators manual for os 2. is written that when i wirring the power cord i must not to plug any wire into place marked by earth symbol.
When i bought mpc60 from ebay,it came with 2-pin power socket(only live and neutral) but the guy sent me with mpc differnt power cord (3 pins newest one which has also grounl,it is like your PC power cable)
So i change the old 2 pin power socket to newest 3-pin socket cause 2 pin power cable is hard to find and i think this cables aren´t manufactured today..
When i wired tha new power cord,simply i didn´t connect earth cable to the earth pin..
Thats all about cables.

The third:I have no something else with 60 except turntable and when i disconnect it the trouble is still occur

The fourth:Please writte back

As-salaamu aleykum!(Peace with you!)