1.9 Bug Reports

Please post 1.9 Bugs here .Thanks

I unchecked 'Collect Usage Statistics' in preferences under other and hit ok but it's not saving.

Noted ,thx

Load any WAV file into MPC Software (or record a new one in the MPC Software)
Go to SAMPLE EDIT
Set LOOP:OFF
Save the sample (any method, e,g, right click 'save' or just save the whole project)
Load the resulting sample in any legacy MPC (have tested in mpc1000, mpc5000, mpc4000 and mpc2000XL)

Expect: Sample to show as LOOP:OFF
Actual: Sample is set to LOOP:ON

noted,thx

MPC-Tutor wrote:Load any WAV file into MPC Software (or record a new one in the MPC Software)
Go to SAMPLE EDIT
Set LOOP:OFF
Save the sample (any method, e,g, right click 'save' or just save the whole project)
Load the resulting sample in any legacy MPC (have tested in mpc1000, mpc5000, mpc4000 and mpc2000XL)

Expect: Sample to show as LOOP:OFF
Actual: Sample is set to LOOP:ON

Please everyone that submits a bug please use Tutors format as a template ..(Note above) makes it easier to submit to the devs..thank you all so much!!! respect ,Masada

Installer 1.9.0.11 ; Mac OSX 10.8.5

Installation fails systematically. First time this ever happens, from 10.2 to 10.8.2 everytime was a breeze.

Waiting for an updated installer...

Cinetrax wrote:Installer 1.9.0.11 ; Mac OSX 10.8.5

Installation fails systematically. First time this ever happens, from 10.2 to 10.8.2 everytime was a breeze.

Waiting for an updated installer...

not a bug os no longer supported.
1.9 specs minium specs
2 GB free disk space for basic installation, 20 GB free disk space for full content installation
4 GB Ram (8 GB recommended)
Dual-Core processor, 2.5 GHz or better
Macintosh: Mac OS X 10.9, 10.10
Windows: Windows 8, Windows 10
- See more at: http://www.akaipro.com/product/mpc-touc ... quirements

In prog mixer
Cursor over vol levels
To adjust one step increments using +/-buttons on hardware
Values go seem to be opposite to buttons. + reduces and vol vice versa
Qlinks are fine but bigger jumps as expected. Issue is inverted +/- hardware buttons

hajisyard wrote:In prog mixer
Cursor over vol levels
To adjust one step increments using +/-buttons on hardware
Values go seem to be opposite to buttons. + reduces and vol vice versa
Qlinks are fine but bigger jumps as expected. Issue is inverted +/- hardware buttons

I'm trying it but cannot reproduce. They are just working fine here.

Add a sound to a pad or program. Set a pad or program to any Out 11-20 or Out 25-32 doesn't produce sound.
Happens on MAIN or PROG MIX screen

All the Outs seems to work just fine in plugin mode in Pro Tools 11.3.1

Expect: Sound to play on any Out set.
Actual: Only plays sound on Out 1-10 and 21-24

Windows 7 64-bit
MPC Software 64-bit

TT_Lab wrote:

hajisyard wrote:In prog mixer
Cursor over vol levels
To adjust one step increments using +/-buttons on hardware
Values go seem to be opposite to buttons. + reduces and vol vice versa
Qlinks are fine but bigger jumps as expected. Issue is inverted +/- hardware buttons

I'm trying it but cannot reproduce. They are just working fine here.

Just got in and tried this again today and guess what..... No issues at all.. I think I was on a bit too much juice.. Lol. Thanks for checking it out and feeding back. My bad false alarm. So far all else is present and solid

Track mutes seem to be jumping on and off.

Set sequence to 8 bars
Set 1st track to 3 lengths then record drum pattern
Set 2nd track to 5 lengths then record drum pattern
Set 3rd track to 2 lengths then record drum pattern

Now record mute events and then play back. The shortened length tracks do not play the mutes back as recorded. They seem to be jumping on and off.

Here it is one related to the new audio, I guess.
Window 10 Pro x64.
MPC sw 1.9
Chop a sample put it to a program make a sequence and suddenly the program goes all quiet, no parameters touched. You can only hear a very low level sound. The sounds in the sample editor continue to be normal in level.
It is not happening all the time but it is happening. Quite frustrating. Anyone?

TT_Lab wrote:Here it is one related to the new audio, I guess.
Window 10 Pro x64.
MPC sw 1.9
Chop a sample put it to a program make a sequence and suddenly the program goes all quiet, no parameters touched. You can only hear a very low level sound. The sounds in the sample editor continue to be normal in level.
It is not happening all the time but it is happening. Quite frustrating. Anyone?

Sorry folks. my mistake. The thing is that the other say I tryied to control the MPC mixer with the A&H zedr16's midi faders. I activated the midi input but was not working. By default I have the faders in midi mode at -inf. Anyway, it seem that chanel 7 of all the 16 faders was acting over the track 1 level. It is a coincidence I think that this fader send the same midi message as this track.
Sorry again not a Bug.