Mpc one and behringer xenyx 802usb

Hey everybody,

I have the Behringe Xenxy connected via USB to a USb HUB that is connected to the MPC. Then I have 2 synthesizers connected to the same hub for MIDI but the audio signal of the synthesizers goes into the interface…
My intention is that I would like to record the synthesizers into the MPC while the MPC is playing drum sound, but that doesn't really work because when I set the interface so that I get input into the MPC, no more drum sound comes from the MPC....

Greets
Sebastian

You cannot use both the internal audio I/O and an external audio interface connected to the MPC via USB at the same time. FULL STOP.

ace_of_dub wrote:You cannot use both the internal audio I/O and an external audio interface connected to the MPC via USB at the same time. FULL STOP.

I did not do this, the mpc sound goes out of the behringer, no audio cables are connected to the mpc as the behringer is the audio device.

S3lect wrote:

ace_of_dub wrote:You cannot use both the internal audio I/O and an external audio interface connected to the MPC via USB at the same time. FULL STOP.

I did not do this, the mpc sound goes out of the behringer, no audio cables are connected to the mpc as the behringer is the audio device.

then there is no problem with the MPC's behavior.

You might be right, but that does not help me with my problem…