By Silkod
Fri Nov 03, 2017 7:26 pm
Hi Guys!
I have arranged my live performance with MPC live "Song Mode", putting the sequences in the show order.
When you have a sequence set up in "hold" it remains looping until you push the "sudden-next" button on the touch screen, e.g.:
SEQ 1: 1 loop
continues to
SEQ 2: hold
<press sudden> and it starts
SEQ 3: 2 loops
When the performance is stacked on SEQ 2 (it is set on "hold") I wanted to go to the next sequence by pressing any pad (not the touch screen), o better, an external order with an external pad. Is it possible?
In the MPC Live manual it is not to much explained the "MIDI control" mode, I dont know if I can use it to order "next sequence" by a CC#3 message, or assigning "next sequence" order to a pad.
It can be configured by an external MMC message?
Could you bring me some light?
Thank you in advance!
I have arranged my live performance with MPC live "Song Mode", putting the sequences in the show order.
When you have a sequence set up in "hold" it remains looping until you push the "sudden-next" button on the touch screen, e.g.:
SEQ 1: 1 loop
continues to
SEQ 2: hold
<press sudden> and it starts
SEQ 3: 2 loops
When the performance is stacked on SEQ 2 (it is set on "hold") I wanted to go to the next sequence by pressing any pad (not the touch screen), o better, an external order with an external pad. Is it possible?
In the MPC Live manual it is not to much explained the "MIDI control" mode, I dont know if I can use it to order "next sequence" by a CC#3 message, or assigning "next sequence" order to a pad.
It can be configured by an external MMC message?
Could you bring me some light?
Thank you in advance!