Audio input routing for live gigs (MPC Live 2.7.2)

Yeah it's never been an issue for me just routing everything to 3-4, & just assumed audio & monitoring could also be routed just as easily.
Clearly not, so I think that clears that up!!

I'll probably give it another try once I get that line out plug fixed or replaced

I gave the solution several posts up. You can ignore it if you want. I'm using it this afternoon in a show.

One caveat: I'm using 2.13.

Moot wrote:Oh for sure, the 1/4 jacks are always the best bet for stage use though as they're easy to get at 4 or 5 meter lengths!
I will eventually get around to trying to get that broken socket fixed at some stage!

One of these will let you run two quarters out the headphone socket. Tape the splitter to the table to stop it falling off and putting unnecessary weight on the headphone socket and breaking that too. Better quality version would be preferable, but if you just want to try..

https://www.ebay.co.uk/itm/404605657511?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lz_1rj-crqa&sssrc=4429486&ssuid=YEDaWsL6TcW&var=&widget_ver=artemis&media=COPY

Thanks guys for all the info & suggestions!

After playing about with it more, seems more practical to just keep using the external reverb pedal rather than using the audio in on the MPC. If there was a simpler way to set it up for an entire set / project file that same as fx sends & mixer settings it could work better, but I think the cons out way the pros as it is for me at least..

I'd glady swap out all the plug in instruments to get some simple JJOS functionality back