By Maksynth
Sun Jul 07, 2024 1:43 am
Is it possible to control AIR STUTTER with the X axis of XYFX and Flex Beat Player with the Y axis?
By Lampdog
Sun Jul 07, 2024 3:57 am
Manual mentions the basic functions.. Start there.
Next, actually open xyfx and go thru all the options you can find in it.
Next, actually open xyfx and go thru all the options you can find in it.
Stop getting automatically offended when you see gold letters!
By Elijah
Sun Jul 07, 2024 11:14 pm
It would be interesting if the XY pad on the MIDI-Control screen could be routed internally.
By Maksynth
Mon Jul 08, 2024 2:19 am
Elijah wrote:It would be interesting if the XY pad on the MIDI-Control screen could be routed internally.
This is a great idea!
By Maksynth
Mon Jul 08, 2024 4:26 am
Maksynth wrote:Elijah wrote:It would be interesting if the XY pad on the MIDI-Control screen could be routed internally.
This is a great idea!
Can I do this if I install a KORG nanoPAD2?
By Ultros
Tue Jul 09, 2024 12:30 pm
NEIN!!! lol. iirc you can not link controllers to fx slots and you cannot reassign xyfx with sub-plugins only choose from a predetermined list.
Ego te absolvo.
By Elijah
Fri Jul 26, 2024 12:20 am
Elijah wrote:It would be interesting if the XY pad on the MIDI-Control screen could be routed internally.
MPC3 can do this!
By Jean-Marc Liotier
Thu Oct 02, 2025 1:04 pm
Maksynth wrote:Can I do this if I install a KORG nanoPAD2?Yes - I just MIDI learned the Korg Nanopad 2's pad's X and Y axis to a track's XYFX's.
That MIDI learn requires a trick though: my pad's X and Y axis are CC 1 and 2 (strange - defaults are supposed to be 118 and 119, so I guess the previous owner changed that) but they are only emitted while the pad is pressed... On pad release the Nanopad 2 sends CC16 - which is its default for "Touch Enable", with values either 127 (on) or 0 (off). So, while pressing the pad and visually controlling that MIDI Learn gets the correct CC, disable MIDI Learn and only then release the pad.
And don't forget to MIDI Learn CC 16 as a Momentary Button ! Doing without is possible but the latching behaviour that requires a tap to disengage hasn't been to my liking.
Now if I could set the Nanopad 2's pads to FlexBeat, maybe I would use FlexBeat...