A new MPC X (ACVC) has been registered with the FCC.

jpeg wrote:the wolves are eating that XL has satiated the masses of MPC fans,

but I gotta look ahead to the next MPC, as my next gen hunger has yet to be quenched, fingers crossed up next is the new gen MPC One .

Just wonder, will that be without all the new gizmos like the step buttons and touch strip?

Lampdog wrote:People using this stand… be aware of the part I circled.

Even when stretched all the way out the stand is BARELY able to fit the XL & that lil front rubber lip will stress the headphone volume knob, don’t break the volume knob. I had to place a layer of foam at the right side of the machine so the knob would have room to move and NOT get rub against caught agains it. If you just throw the machine in there, the knob can’t move because of the pressure.

ive got this one and there's room for the headphone knob -

64hz wrote:
Just wonder, will that be without all the new gizmos like the step buttons and touch strip?

I hope they leave out the step buttons along the top of the new One mkii
If they do include step buttons they will have to be much smaller.

I think the touch strip will be left out; to save space and keep the footprint as small as possible.

I think the pads will be normal size pads as on the Live 3; with the same qlinks and main knob as the live3

Will be the same processor and RAM as the Live3 but with a half size HD, but I think it has the potential to be easiset on the eye, hopefully its all black or retro colour.

jpeg wrote:I hope they leave out the step buttons along the top of the new One mkii
If they do include step buttons they will have to be much smaller.

I think the touch strip will be left out; to save space and keep the footprint as small as possible.

I think the pads will be normal size pads as on the Live 3; with the same qlinks and main knob as the live3

All gen2 units are bigger than their gen1 unit. So the a new One would possibly increase in size too. The touchstrip is too dope & useful to leave out. It may get the same L3 drum pads, but either smaller step buttons, 2 rows of 8 or just 8 with button to switch between 1-8 & 9-16.

If the g2 One getter bigger than there's more of chance for a MPC Mini.

Just imagine what the key 61 Gen2 gonna look like with 16 qlinks

Certified Beatz wrote:Just imagine what the key 61 Gen2 gonna look like with 16 qlinks

As it should’ve been made from the start with a tilt screen.

B-Wise wrote:

Certified Beatz wrote:Just imagine what the key 61 Gen2 gonna look like with 16 qlinks

As it should’ve been made from the start with a tilt screen.

I would have bought for sure. Not now since im 3k lighter

marctronixx wrote:

Lampdog wrote:People using this stand… be aware of the part I circled.

Even when stretched all the way out the stand is BARELY able to fit the XL & that lil front rubber lip will stress the headphone volume knob, don’t break the volume knob. I had to place a layer of foam at the right side of the machine so the knob would have room to move and NOT get rub against caught agains it. If you just throw the machine in there, the knob can’t move because of the pressure.

ive got this one and there's room for the headphone knob -

Is there a link for that one ?

Kaydigi I use this stand for my SP-1200 and TR-1000. I don’t think it will fit the new XL. What is the width of the new XL and I can measure this stand out at full width .

https://www.zzounds.com/item--GATMIXERC ... iid=347391

v00d00ppl wrote:Kaydigi I use this stand for my SP-1200 and TR-1000. I don’t think it will fit the new XL. What is the width of the new XL and I can measure this stand out at full width .

https://www.zzounds.com/item--GATMIXERC ... iid=347391

New XL measurements

Width:
19.21"
Depth:
21.37"

Dimensions (W x D x H): 488 x 543 x 94 mm
Weight: 7.2 kg

https://www.thomann.co.uk/akai_professional_mpc_xl.htm

Certified Beatz wrote:

v00d00ppl wrote:Kaydigi I use this stand for my SP-1200 and TR-1000. I don’t think it will fit the new XL. What is the width of the new XL and I can measure this stand out at full width .

https://www.zzounds.com/item--GATMIXERC ... iid=347391

New XL measurements

Width:
19.21"
Depth:
21.37"

The gator stand is 21.8 wide at the full extension and depth is close to 21 » so it should fit. The lip in the front may hit the headphone knob. Maybe

When you first get XL.

]

Pro-Pack is baked into XL….

Lampdog wrote:Pro-Pack is baked into XL….

It betta had for all that damn money!