Pitch Bend being filtered out

Hi,

I've connected a keyboard to the Live and from there I've tried controlling some hardware modules. Everything works fine (note on/off, mod wheel, etc.) but for some reason the Pitch Bend works plain wrong. I've tried with another keyboard and also connecting my keyboard directly to the modules, just to check it was not some stupid mistake and it seems that the Live is to blame.

The MIDI IN and OUT indicators light up but the Pitch bend value gets stuck at the minimum value.

I have checked with a MIDI Monitor utility connected to the Thru of the module and it ALWAYS shows that Pitch bend Data is being sent to the module but with "broken" values. The Live does not receive Pitch Bend properly as it gets stuck in the lowest value the very first moment you touch the Pitch Bend Wheel of the keyboard controller.

Does anybody know if there is a direct way to report bugs (or enter the beta team)?

On the software (on your computer), there is a small smiley face down in the lower right hand corner: click on that and it takes you to a bug report directly.

Just done a quick check on mine, works fine unless your still pitch bending when it loops then I get similar symptoms
Had the same problem in the past with cubase but that was easily solved by putting a reset at the beginning / end of the loop, not so simple here.