MPC X, MPC Live, MPC One & MPC Key 61 Forum: Support and discussion for the MPC X, MPC Live, MPC Live II, MPC One & MPC Key 61; Akai's current generation of standalone MPCs.
By
jhrv
Thu Nov 28, 2019 1:42 am
Hi All,
My MPC Live is sending a patch reset command to my external synths whenever the sequence loops ends and loops back. I can't figure out how I can have the MPC to stop sending the message. Anyone know?
New Member
Posts: 1
Joined: Thu Nov 28th, 2019
The complete tutorial guide to the MPC X, MPC Live & MPC One
By
Lampdog
Thu Nov 28, 2019 2:17 am
On the sequence that is having trouble, go into step edit and choose timing off so that you can see ALL the step edit events. Something in there is sending a patch change event. Delete that event.
I don't have an X or Live but this would be universal info on all midi sequencers. Try it. Go into step edit and look at everything. Timing should be off so you don't miss anything. That's how it worked on my 2kxl and 4k.
Stop getting automatically offended when you see gold letters!
Supreme Moderator
Posts: 43340
Joined: Fri Jul 25th, 2003
there's also a global setting about sending MIDI program change commands
disable that to be/make sure
Valued Member
Posts: 578
Joined: Thu Jul 12th, 2012
Location: Antwerp, Belgium
