By 1-8-8-1
Tue Jul 28, 2020 11:36 am
Hello,
I thought I would share this work-around I use in my live set.
I found that audio input has a latency of about 16ms compared with audio coming internally from the MPC.
Enough to be noticeable for me.
To compensate I send the audio input direct to the main outs.
All internal MPC programs get sent to a sub mix 1 with an Akai stereo delay inserted in the channel.
setting 16ms, 100% wet, no feedback.
This pulls it all back together.
send effects have to be routed in the same way, except of course any you are sending the audio input to.
I guess this would not be so good if you play the pads live, but I don't use it like that.
Hope this helps someone.
Cheers,
I thought I would share this work-around I use in my live set.
I found that audio input has a latency of about 16ms compared with audio coming internally from the MPC.
Enough to be noticeable for me.
To compensate I send the audio input direct to the main outs.
All internal MPC programs get sent to a sub mix 1 with an Akai stereo delay inserted in the channel.
setting 16ms, 100% wet, no feedback.
This pulls it all back together.
send effects have to be routed in the same way, except of course any you are sending the audio input to.
I guess this would not be so good if you play the pads live, but I don't use it like that.
Hope this helps someone.
Cheers,
