Double triggering pads

Db909 wrote:Well whatever the case may be I’m happy with the way my pads are. Could be all in my head too, new device, not used to playing it, ya know

pressure sensors are quite difficult to Quality Control. it really does vary from unit to unit, especially if they are using cheap parts.

Db909 wrote:May not completely solve your problem, but on my MPC one +, i found the optimal settings to be pad threshold at 4 and sensitivity at default 8. ...

Hi, These parameters are a very good point to start with. My treshold and sensitivity were setup too sensitive by far.

This is what solved my double triggering viewtopic.php?f=48&t=213843&p=1847279#p1847279

So I’ve recently purchased a brand new Akai MPC One +. It works fine in stand alone mode, but when I switch it to controller mode that when all the pads double trigger. Pad 1 sets off pad together. Pad 2 sets off pad 2 together. Pad 3 sets off pad 7 together. Pad 6 sets off pad 3 together, pad 7 sets off pad 11 together, pad 8 sets off pad 9 together, pad 9 sets off pad 13 together, pad 10 sets off pad 12 together, pad 11 sets off pad together, pad 1 2 sets off pad 8 together, pad 13 sets off pad 14 together, pad 15 sets off pad 16 together. I’ve read a lot people having pad issues. Anyone have these many pads going off together? Can anyone help me please?